Description
Heavy-duty units provide increased pulling power over standard units. Continuous-duty units can be energized indefinitely. Intermittent-duty units offer higher pulling power, but can only be energized for a maximum of 180 seconds, then they must cool for a minimum of 540 seconds. Push solenoids extend the stainless steel plunger out from the body of the solenoid. DC frame solenoids are shipped with plungers, but without return springs.
Specifications:
- Action: Pull
- Alternate Mfr Part Number: 28-C-12D
- Coil Resistance: 29.8 Ohms
- Configuration: D-Frame
- Duty Cycle: Continuous
- Force: 43 oz.
- Input Voltage Rating: 12 VDC
- Operating Point: 0.25 In. - 4 oz.
- Operation: 0.25 In. - 4 oz.
- Power Rating: 5.1 W
- Primary Type: Frame
- Series: 28 Series
- Stroke: 0.5”
- Supply Voltage: 12 VDC
- Termination Coil: 3/16” QC terminals
- Type: Linear
- Voltage Rating: 12 VDC